AIEngineeringTool

Shaft Power Transmission

Calculate transmitted mechanical power from torque and rotational speed.

Transmitted torque: 500 N·m
Live concept view — geometry scales with the entered design condition.

Calculate transmitted mechanical power from torque and rotational speed.

Design inputs

Enter known values using the units shown. Results and the live SVG view update immediately.

PRELIMINARY RESULT

Transmitted power75.92 kW
Transmitted power
75.92 kW

Calculation detail

Formula: P = 2πNT / 60000

Mechanical power is calculated from torque and rotational speed.

FORMULA VERIFICATION

Units, scope and reference

Reference: Shigley, Mechanical Engineering Design, circular-shaft torsion and elementary beam theory.

Internal unit basis: N, mm, MPa and SI rotational units converted explicitly. Outputs: tool-specific SI engineering units.

Valid conditions: Positive finite geometry, load and source-controlled property inputs.

Limitations: Preliminary elastic screening only; no code-compliance, detailed stress concentration or service spectrum design.